Crack WEP on Windows without linux, supports intel 5100/5300 NOOB friendly
This is what you need:
1. Commview 6.2(it supports intel 5100 & 5300)
http://www.tamos.com/files/ca6.zip
- this is a direct download, i copied the url from IDM.
2. Aircrack for windows:
http://www.aircrack-ng.org/ (click windows)
PICTURE:http://i41.[censored].com/29c1d6p.jpg
http://www.dll-files.com/dllindex/dll-fi...ml?cygwin1 (click download)
PICTURE:http://i40.[censored].com/vq6249.jpg
http://www.tuto-fr.com/tutoriaux/crack-w...p/Peek.zip
(downloads the same as commview6.2)
INSTALLATION:
1.Install commview 6.2, install like any other regular program.
2. extract aircrack zip file to root, which is "C" for most computers
3.now extract peek zip file to the bin folder which is in aircrack like this C:\aircrack folder\bin.
4. and extract dll file to bin folder also.
You will be overwriting some files, just click yes to overwrite them.
I recommend making a shortcut for aircrack GUI.exe, because your going to use it alot.
Now go take a 5 minute break.
OK back from break? Now get ready
Real WEP capturing steps:
1. open commview 6.2 and click the M and the C to shade them and then click play.(The D should be unshaded )
2.Now click start scan, choose band "i use the b/g/n" and then click capture don't worry.
3.Now wait about 2 minutes and right click and copy mac address of the wep network with the most packets or best signal.
4. Enable MAC address rules, action: capture, add record: both, paste mac address, then click add mac address(look like pic except the mac address, will be different)
5. Final steps in configuration
Click logging tab, make sure auto saving is checked, and increase size to 150 or higher, this can be adjusted later and leave logs directory as is.(I did 1,000,000 mb = 1GB, because of capturing 13 networks at a time).
NOW WAIT until you get about 1million through 2 million packets, or just record overnight for atleast 2 night. Then continue.
AS you can see I have collected keys for about 1 week on and off, becuase of torrent download
PART 2
1.click logging tab and save all packets in buffer, then click concatenate Logs. and select all logs and save in folder.(I saved in a new folder called binded and you can see theere from different days)
2. Open log viewer, by pressing ctlr+L or going to file in top right corner.
3.Load commview logs, should look like this pics when loaded.(I have 189518 keys, out of almost 2 millon packets )
4. now go to file and click export logs and to the bottom of drop box click wireshark/tcp dump format. now give this file a name, something easy to remember.
5. Your done with commview, but i recommend to leave open to get more packets just in case.
PART 3
1. Open aircrack GUI.exe
2. now click choose, and go find the .cap file you saved.
3.click launch and click the one you want, i wanted the first one so i choose 1 and press enter.(this step is only for people with multiple networks)
4. now wait and you should get this.
PICTURE:http://i40.[censored].com/1z1uvkz.jpg
5. now right click and select all and press enter and save to notepad. or connect and enter key without colon in wep password box.
That's it .
The other 25% that I got it from was from here:
5% - http://wirelessdefence.org/Contents/Airc...nstall.htm
10% - other multiple sources.
I got this working, because of stress.
EDUCATION PURPOSES ONLY. I"LL ADD MAC CHANGER WHEN I FIND A GOOD ONE.
1. Commview 6.2(it supports intel 5100 & 5300)
http://www.tamos.com/files/ca6.zip
- this is a direct download, i copied the url from IDM.
2. Aircrack for windows:
http://www.aircrack-ng.org/ (click windows)
PICTURE:http://i41.[censored].com/29c1d6p.jpg
http://www.dll-files.com/dllindex/dll-fi...ml?cygwin1 (click download)
PICTURE:http://i40.[censored].com/vq6249.jpg
http://www.tuto-fr.com/tutoriaux/crack-w...p/Peek.zip
(downloads the same as commview6.2)
INSTALLATION:
1.Install commview 6.2, install like any other regular program.
2. extract aircrack zip file to root, which is "C" for most computers
3.now extract peek zip file to the bin folder which is in aircrack like this C:\aircrack folder\bin.
4. and extract dll file to bin folder also.
You will be overwriting some files, just click yes to overwrite them.
I recommend making a shortcut for aircrack GUI.exe, because your going to use it alot.
Now go take a 5 minute break.
OK back from break? Now get ready
Real WEP capturing steps:
1. open commview 6.2 and click the M and the C to shade them and then click play.(The D should be unshaded )
2.Now click start scan, choose band "i use the b/g/n" and then click capture don't worry.
3.Now wait about 2 minutes and right click and copy mac address of the wep network with the most packets or best signal.
4. Enable MAC address rules, action: capture, add record: both, paste mac address, then click add mac address(look like pic except the mac address, will be different)
5. Final steps in configuration
Click logging tab, make sure auto saving is checked, and increase size to 150 or higher, this can be adjusted later and leave logs directory as is.(I did 1,000,000 mb = 1GB, because of capturing 13 networks at a time).
NOW WAIT until you get about 1million through 2 million packets, or just record overnight for atleast 2 night. Then continue.
AS you can see I have collected keys for about 1 week on and off, becuase of torrent download
PART 2
1.click logging tab and save all packets in buffer, then click concatenate Logs. and select all logs and save in folder.(I saved in a new folder called binded and you can see theere from different days)
2. Open log viewer, by pressing ctlr+L or going to file in top right corner.
3.Load commview logs, should look like this pics when loaded.(I have 189518 keys, out of almost 2 millon packets )
4. now go to file and click export logs and to the bottom of drop box click wireshark/tcp dump format. now give this file a name, something easy to remember.
5. Your done with commview, but i recommend to leave open to get more packets just in case.
PART 3
1. Open aircrack GUI.exe
2. now click choose, and go find the .cap file you saved.
3.click launch and click the one you want, i wanted the first one so i choose 1 and press enter.(this step is only for people with multiple networks)
4. now wait and you should get this.
PICTURE:http://i40.[censored].com/1z1uvkz.jpg
5. now right click and select all and press enter and save to notepad. or connect and enter key without colon in wep password box.
That's it .
The other 25% that I got it from was from here:
5% - http://wirelessdefence.org/Contents/Airc...nstall.htm
10% - other multiple sources.
I got this working, because of stress.
EDUCATION PURPOSES ONLY. I"LL ADD MAC CHANGER WHEN I FIND A GOOD ONE.
Tags: Wi-FI Hacking
Previous Article
Subscribe to:
Post Comments (Atom)
Share your views...
1 Respones to "Crack WEP on Windows without linux, supports intel 5100/5300 NOOB friendly"
If you ever want to change or up your university grades contact cybergolden hacker he'll get it done and show a proof of work done before payment. He's efficient, reliable and affordable. He can also perform all sorts of hacks including text, whatsapp, password decrypt,hack any mobile phone, Escape Bancruptcy, Delete Criminal Records and the rest
Email: cybergoldenhacker at gmail dot com
11 March 2020 at 11:34
Post a Comment